EPDM Straight Sleeve
|
DescriptionEPDM Sleeve provides standard connections for an air intake system. |
Feature Benefits
- Specifically formulated EPDM compound.
- Available in nitrile and chloroprene and silicone compounds.
- Vacuum collapse rating exceeds 4" Hg. mercury.
- Recommended for temperatures: -60°F to +300°F duty.
- Complies with physical properties requirements of ASTM D2000 3BA715A14B13C12F17.
- 70 ±5 Shore A hardness
- 1500 PSI Tensile, minimum.
- 250% Elongation, minimum.
- Air age, 70 Hrs. at 100 degrees C.
- Durometer Change, +10, max.
- Tensile Change, -25%, max.
- Elongation Change, -25%, max.
- Comp. Set, Method B, at 70 degrees C. 25% max.
- Ozone Resistance, D1171, Method B, Quality Retention Rating: 100%
- Low Temp. Brittleness, D2137, Method A. Non Brittle After 3 Minutes at -40 degrees C.
| Part # | ID | OD | L | T |
|---|---|---|---|---|
| S200X250 | 2.00 | 2.50 | 2.50 | 0.19 |
| S200X900 | 2.00 | 2.38 | 9.00 | 0.19 |
| S300X300 | 3.00 | 3.38 | 3.00 | 0.19 |
| S400X350 | 4.00 | 4.50 | 3.50 | 0.25 |
| S400X510 | 4.00 | 4.50 | 5.10 | 0.25 |
| S500X350 | 5.00 | 5.50 | 3.50 | 0.25 |
| S550X400 | 5.50 | 6.00 | 4.00 | 0.25 |
| S600X350 | 6.00 | 6.50 | 3.50 | 0.25 |
| S700X350 | 7.00 | 7.50 | 3.50 | 0.25 |
| S800X350 | 8.00 | 8.50 | 3.50 | 0.25 |
| S900X350 | 9.00 | 9.50 | 3.50 | 0.25 |
Custom-cut lengths available.